A . [SWA]stppriority0
B . [SWA-Ethernet1/0/1]stppriority0
C . [SWA]stprootpriority0
D . [SWA-Ethernet1/0/1]stprootpriority0
[单选题]配置交换机SWA工作在RSTP工作模式下的命令为()。A .[SWA]stpmoderstpB .[SWA-Ethernet1/0/4]stpmoderstpC .[SWA]undostpmodestpD . D.[SWA-Ethernet1/0/4]undostpmodestp
[单选题]配置交换机SWA上的接口Ethernet1/0/1为边缘端口的命令为()。A .[SWA]stpenableedged-portB .[SWA-Ethernet1/0/1]stpenableedged-portC .[SWA]stpedged-portenableD . D.[SWA-Ethernet1/0/1]stpedged-portenable
[单选题]在STP协议中,设所有交换机所配置的优先级相同,交换机1的MAC地址为00-e0-fc-00-00-40,交换机2的MAC地址为00-e0-fc-00-00-10,交换机3的MAC地址为00-e0-fc-00-00-20,交换机4的MAC地址为00-e0-fc-00-00-80,则根交换机应当为().A . 交换机1B . 交换机2C . 交换机3D . 交换机4
[多选题] 在交换机SWA上执行displaystp命令后,交换机输出如下:[SWA]displaystp-------[CISTGlobalInfo][ModeMSTP]-------CISTBridge:32768.000f-e23e-f9b0BridgeTimes:Hello2sMaxAge20sFwDly15sMaxHop20从以上输出可以判断()。A .当前交换机工作在RSTP模式下B .当前交换机工作在MSTP模式下C .当前交换机的桥优先级是32768D . D.当前交换机是根桥
[单选题]交换机运行STP时,缺省情况下交换机的优先级为().A . 4096B . 8192C . 16384D . 32768
[单选题]交换机的优先级增值是_____。A.1024B.2048C.4096D.8192
[单选题]交换机在配置前的默认配置为:所有端口均无端口名,所有端口的优先级为()A . ON方式B . Auto方式C . Normal方式D . OFF方式
[单选题]交换机在配置前的默认配置为:所有端口均无端口名,所有端口的优先级为()。A.ON方式B.Auto方式C.Normal方式D.OFF方式
[单选题]交换机优先级增量值是A.1024B.2048C.4096D.8192
[单选题]一台Cisco6500交换机的生成树优先级是20480,若将其优先级提升2级,正确的配置命令是( )。A.B.C.D.